High Powered Entertainment System with Karaoke

Active loudspeaker equipped with dual 10 inch woofers and two crisp tweeters to deliver powerful sound and pounding bass that will enrich any room or backyard event. The top panel control centre features a 5-band EQ control and LCD display enhancing any karaoke experience.

Multi-Function Party Entertainment

Active loudspeaker equipped with dual 10 inch woofers and two crisp tweeters to deliver powerful sound and pounding bass that will enrich any room or backyard event. The top panel control centre features a 5-band EQ control and LCD display enhancing any karaoke experience.

Sound Activated Party Lights

The built-in party lights beat in time to your music. The Entertainment System projects dazzling lights and colourful patterns onto ceilings and walls, giving you an instant party atmosphere.

Connect Instantly

Stream music wirelessly from Bluetooth® compatible devices, MP3, CD, USB and other devices. You can also play your favourite sound track collections via USB and SD storage devices.

MAX Power Output 2400 Watt
Sound System Dual 10” Woofers, Dual 3” Tweeters
Frequency Response 45Hz-20kHz
Sensitivity (1w/1m) 92dB
Impedance 4 Ohm
Maximum SPL 128dB
Dispersion (@6dB) H90°X V50°
Crossover 3 kHz
FM Frequency FM 87.5 – 108MHz
Power Supply 240V
Microphone Battery Operated Requires 2 x ‘AA’
Maximum USB Flash / SD Memory Card Support 32GB
Wireless Microphone included

My TV does not turn on, the TV has no power

  • Insert the power plug securely into the power outlet and ensure the power outlet is switched on.
  • Some models may have a main power switch which is located on the side, bottom or back of the television. This needs to be switched on.
  • Press the standby button to wake up TV and press again to activate standby mode.

My TV does not pick up any TV channels

  • Ensure the TV is connected to a working digital indoor or outdoor antenna (Note: Analogue TV broadcasting is no longer in use in Australia, your old antenna may have worked with your Analogue TV but is not suitable for Digital TV Broadcasts).
  • Depending on your location from the transmission tower, if you are within a range where the signal strength is strong, an indoor antenna with an amplifier should work. But if your location’s signal strength is low, you may need a high-gain aerial for best reception. In metro areas, there will be interference when using an indoor antenna which may require repositioning of the indoor antenna. Whenever possible, please use an outdoor digital antenna, not an indoor antenna. This will ensure the best reception possible.
  • Once the TV has been connected and the connector is secure, please run an “Auto Scan” or “Auto Search” to scan all channels for first time use.

My TV does not receive all channels

  • Ensure the TV is connected to a working digital indoor or outdoor antenna.
  • Depending on your location from the transmission tower, if you are within a range where the signal strength is strong, an indoor antenna with an amplifier should work. But if your location’s signal strength is low, you may need a high-gain aerial for best reception. In metro areas, there will be interference when using an indoor antenna which may require repositioning of the indoor antenna. Whenever possible, please use an outdoor digital antenna, not an indoor antenna. This will ensure the best reception possible.
  • All aerials, cables and connections need to be in good condition – cables and connections in particular can become corroded, especially if you live near the sea.
  • Channel broadcasting frequencies may have changed or new TV Channels may have been added. Please re-scan all channels. If there is no improvement try a different antenna and re-scan all channels. If there is still no improvement, please consult an antenna specialist or contact your broadcasting service to check if there is any maintenance work which may impact on the services in your area.
  • Some HD channels only work on a MPEG-4 compatible TV. Please check the specifications in your TV User Manual.

My TV is emitting distorted sound, or no sound at all

  • Ensure that all external devices such as DVD players, amplifiers or TV boxes are connected properly.
  • Ensure that the input settings and audio settings for the TV are correct.
  • Ensure the volume is not muted. If it is, press the MUTE button on the remote control to restore the sound.
  • Adjust the antenna position, direction and connection.
  • If earphones are connected, unplug them.
  • Adjust the volume to a suitable level by pressing the VOL+/VOL- button.

My remote control does not work

  • Check that the batteries are correctly installed.
  • The batteries may be exhausted; please replace them.
  • Make sure to point the remote control at the remote control sensor and try it again. Make sure to use the remote control at a distance of no more than 5 metres from the sensor.
  • Remove any obstacles between the remote control and remote control sensor.
  • Confirm that the TV still has power by trying to operate the menu buttons on the TV itself.

My TV picture contains noise when watching free-to-air channels

  • Electronic equipment near the unit such as appliances or electric tools may cause interference. Relocate the TV or move the appliances away from the TV.
  • Adjust the antenna position, direction and connection.

My TV turns off by itself.

  • The Sleep Timer may have been turned on. To verify this, check the Sleep Timer and Auto Standby settings in the Time Settings menu.

Nothing displays when I tried to connect my PC via HDMI to my TV

  • Most laptops will automatically connect, some will require manual configuration. Please check with the laptop manufacturer for instructions.
  • After ensuring the laptop is properly configured and connected to the TV, on the remote press the INPUT button and navigate to HDMI ( HDMI 1 or HDMI 2 depending on which port is in use).

My TV does not read or write the USB storage device

  • The USB storage device may not be formatted correctly. To format the USB storage device, please refer to the user manual included with your TV.

I cannot play movie files via USB device

  • Check that the USB storage device is correctly connected. Ensure that the device is compatible; and both the file system and file formats are supported. Please refer to the user manual included with your TV for detailed information on supported formats.
  • If an “Unsupported File” message is displayed, the file format or codec is unsupported or corrupted. For compatible formats, please refer to the Media Specification section in the user manual included with your TV.
  • Do not use a device that has security functions or other special functions. Do not use a device that is divided into two or more partitions. A USB hub cannot be used to connect USB devices to your TV.

My 4K TV does not play 4K resolution.

  • All current 4K Ultra HD LED LCD TVs require Ultra HD content and additional ultra high definition enabled devices (sold separately) in order to experience the Ultra HD resolution (3840 x 2160) effect. At this stage, TV programming in Australia is not available in Ultra HD, and the Ultra HD resolution effect can therefore only be experienced via HDMI source, not via USB connection. However, not all Blu-ray Disc players, media players, TV boxes, video cameras, cameras, game consoles, computers can output 4K signal. To see if your unit can output 4K signal, check the specifications of the product or contact the manufacturer for details.
  • When watching 4K content on YouTube via HDMI connection from compatible PCs, TV boxes and game consoles, please be aware that YouTube uses a different codec so some movies may not be supported by your PC, TV box or game console. Although YouTube supports 4K resolution, because the content is posted by YouTube users, there is no guarantee that the video itself was created in 4K or is up-converted to 4K resolution.

Where do I find the serial number and/or model number on my TV?

All of our products have the serial number and/or model number printed on the outer packaging at the time of purchase, however it can also be found on the back of the TV.

I can’t hear anything from my microphone through the Entertainment System

  • Ensure that you adjust the Microphone Volume Control dial to increase the microphone volume.
  • Check that the microphone is turned on. If not, push the switch all the way up to the top to switch ON the microphone.
  • Change the batteries.

There is a humming or buzzing sound emitting through the Entertainment System

  • Try to keep any audio signal cables or mobile phones away from the speaker power cords.

My Entertainment System won’t turn on

  • Ensure that you have correctly connected the power cable to the rear of the unit. It should not be loose.
  • Ensure the power switch on the top panel of the unit is switched ON.
  • Make sure the power is switched on at the outlet.

The Party Light won’t turn on

  • Ensure the light switch on the rear panel of the unit is switched ON.
  • Make sure the power cord is correctly connected and the power is switched on at the outlet.

I am not picking up any radio stations

  • The Entertainment System will only receive FM radio stations not AM.
  • Please adjust the position of the unit to optimise the best reception of the FM radio. For specific models, you can extend the telescopic antennas at the rear of the unit to increase the reception.
  • Electronic equipment near the unit such as appliances or electric tools may cause interference. Relocate the Entertainment System or move the appliances away from the Entertainment System.

The speaker makes a noise when I first turn it on

  • This is normal when the system first initialises.
  • Try to keep any audio signal cables or mobile phones away from the Speaker.

I can’t connect my mobile phone to the Entertainment System via Bluetooth®

  • Ensure the Entertainment System has been switched to Bluetooth mode with “bLUE” showing on the Mode Display.
  • You can only connect the Entertainment System to one device at a time. Ensure that there is no other device connected to the Entertainment System. If one is, ensure that the device is “unpaired” from the Entertainment system first, before pairing another device.

Our products are guaranteed to be free from defects in workmanship and parts for a period of 12 months from the date of purchase. Defects that occur within this warranty period, under normal use and care, will be repaired, replaced or refunded at our discretion. The benefits conferred by this warranty are in addition to all rights and remedies in respect of the product that the consumer has under the Competition and Consumer Act 2010 and similar state and territory laws.

Uncle Bill’s Australia Pty Ltd provides the following warranty in relation to its televisions and consumer electronic products (collectively the “Product”).

Standard Warranty

Subject to the terms and conditions below, Uncle Bill’s Australia Pty Ltd warrants that the Product will be replaced or repaired, if defects have occurred in the Product during the Standard Manufacturer Warranty period of 12 months.

This warranty covers product purchased from Signify authorised dealers or re-sellers only.

This warranty covers the original purchaser only and it is not transferrable if the Product is sold by the original purchaser.

Warranty Period Table

Signify® PRODUCT

SIZE

WARRANTY PERIOD

WARRANTY SERVICE TYPE

TV 42’’ and above 12 months In-Home Service.
TV 19’’ to 40’’ 12 months Authorised Service Centre or Return to Store with Return Authorisation Number.
All other Signify products 12 months Authorised Service Centre or Return to Store.

Warranty Service Type

In Home Service/Pick up Service

This service will only be provided as part of this warranty if all the following conditions are met:

a) The product is indicated in the Warranty Period Table;
b) The product is within the warranty period; and
c) The product is located within the normal service area of the local Signify®Authorised Service Centre.

If the Signify® team determines that the product is not repairable on site, the customer will need to take the product to a Signify® Authorised Service Centre (at customers cost) and the repair will be undertaken at this location. After the repair, the product will be available for collection or returned to the purchaser at a fee upon request.

Authorised Service Centre/Carry-in Service

The purchaser is required to send the product at their own expense to the nearest Signify® Authorised Service Centre for repair. After the repair, the product will be available for collection or return to the purchaser at a fee upon request. Signify® in-home service can be made available at a fee if requested.

  1. A 6-month replacement warranty is applicable to all accessories such as remotes, power adaptors and cables, as long as all warranty requirements are met. Damage from misuse will not be accepted.
  2. Signify®will ensure to the best of its abilities that all required parts are made available for any required service/repair.
  3. Signify®/Uncle Bills Australia Pty Ltd and its Authorised Service Centres will endeavour to complete product repairs within a reasonable period based on available resources and workload during the time when service is requested and performed.
  4. Refurbished parts may be used to repair the product. In the case of a replacement, the product may be replaced, with a refurbished unit of the same type or, if one is unavailable, a similar refurbished model with equal or better features and specifications.
  5. Please be advised that if the product presented for repair is capable of retaining user-generated data, the data may be lost during servicing. Customers are strongly encouraged to back up all important information/data before sending the product in for service/repair.
  6. Service will be provided only during normal business hours and under safety conditions and circumstances. Signify®and its authorised service agents can refuse any repair if safety, in relation to OH&S, becomes a concern to its staff or authorised service agents’ personnel.

The warranty is void and warranty claims may be refused, subject to the Australian Consumer Law, if:

  • The product was not transported, installed, operated or maintained according to the instruction given by the manufacturer.
  • The product was abused, damaged, tampered with, altered or repaired by any unauthorised persons.
  • Product failure is due to accidents during use, installation or transit, power surges, use of defective or incompatible external devices, exposure to abnormal conditions such as excessive temperatures or humidity, or entry of liquids, objects or creatures inside the product (eg. cockroach infestations).
  • The product has been dropped or has collided with another object, has been used for reasons other than its intended use, has been accidently or deliberately misused, or for others reasons such as theft, vandalism, floods, fires, earthquakes, electrical storms or any other act illegal act or war related events.
  • The serial number of the product is missing or has been tampered with.
  • The product is purchased in an Auction.
  • The product is incorrectly assembled or installed.

NOTE: If any repairs or services requested by the customer are outside of the terms and conditions of this warranty, or where a fault is determined to be outside of the terms and conditions of the warranty during an in-home service call, the customer shall be charged for the cost of the repair and/or the in-home service call fee.

  1. No one is authorised to assume any liability on behalf of Signify®or impose any obligation on it, in connection with the sale of any equipment other than as stated in this warranty and outlined above.
  2. Signify®and/or its Authorised Service Centres reserve the right to inspect and verify whether the product is exhibiting a major failure as claimed by customers/retailers.
  3. Image retention or burn-in can be a problem for all phosphor based displays. In extreme cases permanent phosphor burn can occur if still/repetitive images are left on the screen for extended periods of time. Such damage to the screen is not covered by the warranty. Please ensure that precautions are followed to avoid permanent damage to your display.
  4. All LCD, LED LCD and plasma panels can exhibit some bright, dark or partially lit pixels, a normal limitation of these technologies and the manufacturing process involved and are usually not noticeable when viewing normal screen images. Defective pixels are not a warranty issue, unless they exceed the ISO 13406-2* standard for pixel defects. All panels used for Signify®TVs have passed ISO 13406-2 standards.

* To regulate the acceptability of defects and to protect the end user, ISO have created a standard for manufacturers to follow. ISO 13406-2 recommends how many defaults are acceptable in a display before it should be replaced, within the terms and conditions of warranty.

  1. Where a product has been mounted to a wall, it is your responsibility to remove it from the wall to repair or service and re-install the product to the wall after service.
  2. If Signify®or its Authorised Service Centre determines that your claim of a Signify® consumer product is invalid, Signify® may charge you for any labour, parts or transport costs incurred by Signify® or its agent in assessing your claim.

If you have any issues with this product or require further information, please contact our helpful customer support team via phone or email (details below). The product comes with a full 1 year warranty for your piece of mind. In many cases we will resolve the issue without you having to return the product. Our friendly staff can also help you with troubleshooting or advice in relation to the use of this product. Please ensure that you have the model number, serial number and purchase receipt ready before you call.

Download Signify Warranty Here

Customer Support Team

1300 777 137

Hours of Operation* :

Monday – Friday:   9am – 4:30pm
Saturday:   9am – 3pm

* Hours of Operation are Australian Eastern Standard Time.

service@www.signifyelectronics.com.au

www.signifyelectronics.com.au

 



For further information or help, please contact us:

2 + 3 =

OUR ADDRESS

Head Office

1300 777 137
48B Egerton Street, Silverwater, NSW 2128, Australia

service@signifyelectronics.com.au

_____________________

Service Centre

1300 777 137
2/24 Anderson Road, Smeaton Grange, NSW 2567, Australia

service@www.signifyelectronics.com.au

Opening Hours – 9:00am – 4:30pm (Mon-Fri), 9:00am – 3:00pm (Sat)

 


WELCOME TO SIGNIFY®

Welcome to Signify®, your number one source for all things electronics! We’re dedicated to giving you the very best, with a focus on always exceeding expectations.
Serving customers all over Australia, we are thrilled to be a part of the cutting edge wing of the technology industry.
We hope you enjoy our products as much as we enjoy offering them to you. If you have any questions or comments, please don’t hesitate to contact us.